Sonible smartComp v1.0.2 Free Download (VST, VST3, AAX) [WIN.OSX x64]
Sonible smartComp v1.0.2: A Spectro-Dynamic Compressor Plugin for Audio Mixing and Mastering
The main title of the article Introduction
If you are looking for a plugin that can help you achieve well-balanced compression results in just a few seconds, you might want to check out Sonible smartComp v1.0.2. This is a spectro-dynamic compressor plugin that analyzes the input signal and automatically adjusts the compression parameters to achieve a transparent and balanced sound. It also allows you to fine-tune the compression settings for different frequency ranges, as well as apply sidechain filtering and spectral compression display. Sonible smartComp is designed to be a versatile and powerful tool for audio mixing and mastering, whether you are working with vocals, drums, guitars, synths, or any other audio source. In this article, we will take a closer look at what Sonible smartComp is, what it does, and why it is useful for audio mixing and mastering. We will also show you how to use Sonible smartComp in various DAWs and scenarios, and compare its pros and cons with other compression plugins.
Sonible smartComp v1.0.2 VST, VST3, AAX x86 x64
What is a spectro-dynamic compressor?
Before we dive into the features of Sonible smartComp, let's first understand what a spectro-dynamic compressor is and how it differs from conventional compression. A compressor is a device that reduces the dynamic range of an audio signal, meaning that it makes the loud parts quieter and the quiet parts louder. This can help to make the audio more consistent, punchy, and clear. However, conventional compressors apply the same amount of compression to the entire frequency spectrum of the signal, which can sometimes result in unwanted artifacts such as pumping, distortion, or loss of detail. A spectro-dynamic compressor, on the other hand, applies different amounts of compression to different frequency ranges of the signal, depending on their spectral characteristics and dynamics. This can help to preserve the natural balance and timbre of the audio, as well as enhance its clarity and definition. A spectro-dynamic compressor can also adapt to the changes in the input signal over time, making it more responsive and transparent.
What are the features of Sonible smartComp?
Sonible smartComp is a spectro-dynamic compressor plugin that offers a number of features that make it stand out from other compression plugins. Here are some of the main features of Sonible smartComp:
AI-powered auto-parameterization: Sonible smartComp uses artificial intelligence to analyze the input signal and automatically set the optimal compression parameters for each frequency band. This can save you a lot of time and hassle, as you don't have to manually tweak the settings for each band. You can also adjust the global parameters such as threshold, ratio, attack, release, and makeup gain, as well as choose from different compression styles such as transparent, punchy, or smooth.
Frequency-selective processing: Sonible smartComp allows you to fine-tune the compression settings for up to four frequency bands: low, low-mid, high-mid, and high. You can adjust the crossover frequencies, solo or mute each band, and apply different amounts of compression to each band. You can also use the spectral tilt feature to adjust the overall tonal balance of the signal.
Sidechain filtering: Sonible smartComp lets you use an external signal as a sidechain input to trigger the compression. You can also apply a high-pass or low-pass filter to the sidechain signal to focus on a specific frequency range. This can help you create dynamic effects such as ducking or de-essing.
Spectral compression display: Sonible smartComp provides a graphical representation of the input and output signals in real-time. You can see how the compression affects each frequency band, as well as how much gain reduction is applied. You can also switch between different views such as waveform, spectrum analyzer, or sonogram.
How to use Sonible smartComp?
Now that we have learned about the features of Sonible smartComp, let's see how to use it in practice. In this section, we will provide a step-by-step guide on how to install and use Sonible smartComp in various DAWs and scenarios.
Installation and activation
To install Sonible smartComp on your computer, you need to follow these steps:
Download the installer file from Sonible's website. You can choose between Windows or Mac versions.
Run the installer file and follow the instructions on the screen. You can choose between VST2, VST3, or AAX formats.
Launch your DAW and scan for new plugins. You should find Sonible smartComp under your plugin list.
To activate Sonible smartComp, you need to create an account on Sonible's website and register your product with your email address and serial number. You can find your serial number in your confirmation email or on your user account page.Once you have registered your product, you will receive an activation code via email. Enter the activation code in the plugin interface and click on "Activate". You can also activate Sonible smartComp offline by following the instructions on Sonible's website.
Congratulations, you have successfully installed and activated Sonible smartComp on your computer. You can now use it as a plugin in your DAW of choice.
Interface and controls
Sonible smartComp has a simple and intuitive user interface that consists of four main sections: input, output, compression, and frequency bands. Here is a brief overview of each section and its controls:
Input: This section shows the input level meter and the input gain knob. You can adjust the input gain to match the level of your audio source. You can also click on the input level meter to switch between peak and RMS modes.
Output: This section shows the output level meter and the output gain knob. You can adjust the output gain to compensate for the gain reduction caused by the compression. You can also click on the output level meter to switch between peak and RMS modes.
Compression: This section shows the compression settings and the spectral compression display. You can adjust the global compression parameters such as threshold, ratio, attack, release, and makeup gain. You can also choose from different compression styles such as transparent, punchy, or smooth. The spectral compression display shows how the compression affects each frequency band in real-time. You can switch between different views such as waveform, spectrum analyzer, or sonogram.
Frequency bands: This section shows the frequency-selective processing settings and the crossover frequencies. You can adjust the compression settings for up to four frequency bands: low, low-mid, high-mid, and high. You can adjust the crossover frequencies by dragging the vertical lines on the spectral compression display. You can also solo or mute each band by clicking on the speaker icons. You can also use the spectral tilt feature to adjust the overall tonal balance of the signal.
Using smart:comp in different DAWs
Sonible smartComp is compatible with most DAWs that support VST2, VST3, or AAX formats. To use Sonible smartComp as a plugin in your DAW, you need to follow these steps:
Open your DAW and create a new project or load an existing one.
Add an audio track or select an existing one that contains the audio source you want to compress.
Add Sonible smartComp as an insert effect on your audio track. You can find it under your plugin list.
Adjust the input gain to match the level of your audio source.
Click on the "smart" button to let Sonible smartComp analyze your audio source and set the optimal compression parameters for each frequency band.
Adjust the global compression parameters such as threshold, ratio, attack, release, and makeup gain to suit your taste and style.
Adjust the frequency-selective processing settings for each band to fine-tune the compression results.
Adjust the output gain to compensate for the gain reduction caused by the compression.
Compare the processed and unprocessed signals by clicking on the bypass button.
Save your project and export your audio file.
The exact steps may vary depending on your DAW of choice, but the general workflow is similar. Here are some examples of how to use Sonible smartComp in popular DAWs such as Ableton Live, Logic Pro X, Pro Tools, etc.
Using smart:comp in Ableton Live
To use Sonible smartComp in Ableton Live, you need to follow these steps:
Open Ableton Live and create a new project or load an existing one.
Add an audio track or select an existing one that contains the audio source you want to compress.
Go to the browser panel and navigate to Plug-ins > VST > Sonible > smartComp.vst. Drag and drop it onto your audio track.
Ableton Live will automatically scan for new plugins and load Sonible smartComp on your audio track.
Follow steps 4-10 from above to use Sonible smartComp as a plugin in Ableton Live.
Using smart:comp in Logic Pro X
To use Sonible smartComp in Logic Pro X, you need to follow these steps:
Open Logic Pro X and create a new project or load an existing one.
Add an audio track or select an existing one that contains the audio source you want to compress.
Go to the mixer panel and click on the insert slot of your audio track. Navigate to Audio Units > Sonible > smartComp > Stereo. Select it to load Sonible smartComp on your audio track.
Logic Pro X will automatically scan for new plugins and load Sonible smartComp on your audio track.
Follow steps 4-10 from above to use Sonible smartComp as a plugin in Logic Pro X.
Using smart:comp in Pro Tools
To use Sonible smartComp in Pro Tools, you need to follow these steps:
Open Pro Tools and create a new project or load an existing one.
Add an audio track or select an existing one that contains the audio source you want to compress.
Go to the insert section of your audio track and click on the first empty slot. Navigate to Plug-in > Dynamics > Sonible smartComp (AAX). Select it to load Sonible smartComp on your audio track.
Pro Tools will automatically scan for new plugins and load Sonible smartComp on your audio track.
Follow steps 4-10 from above to use Sonible smartComp as a plugin in Pro Tools.
Using smart:comp for different audio sources
Sonible smartComp can be used for different audio sources such as vocals, drums, guitars, synths, etc. Depending on the type and characteristics of the audio source, you may need to adjust the compression settings differently to achieve the best results. Here are some examples of how to use Sonible smartComp for different audio sources:
Using smart:comp for vocals
Vocals are one of the most important elements in any music production, and they require careful compression to make them sound clear, consistent, and expressive. Sonible smartComp can help you achieve well-balanced vocal compression in just a few clicks. Here are some tips on how to use Sonible smartComp for vocals:
Use the "smart" button to let Sonible smartComp analyze your vocal track and set the optimal compression parameters for each frequency band. This will help you achieve a transparent and natural sounding compression that preserves the dynamics and nuances of the vocal performance.
Adjust the global compression parameters such as threshold, ratio, attack, release, and makeup gain to suit your taste and style. You can also choose from different compression styles such as transparent, punchy, or smooth. A transparent style will keep the vocal sound natural and unprocessed, while a punchy style will add some energy and presence to the vocal, and a smooth style will make the vocal sound more warm and soft.
Adjust the frequency-selective processing settings for each band to fine-tune the compression results. You can adjust the crossover frequencies by dragging the vertical lines on the spectral compression display. You can also solo or mute each band by clicking on the speaker icons. You can also use the spectral tilt feature to adjust the overall tonal balance of the vocal. A general rule of thumb is to apply more compression to the low-mid and high-mid bands, where most of the vocal energy and intelligibility are located, and less compression to the low and high bands, where most of the vocal noise and sibilance are located.
Use the sidechain filtering feature to apply a high-pass filter to the sidechain signal. This will prevent low-frequency sounds such as plosives or breaths from triggering the compression too much. You can adjust the cutoff frequency by dragging the horizontal line on the spectral compression display. A good starting point is around 100 Hz.
Use the spectral compression display to monitor how the compression affects each frequency band in real-time. You can switch between different views such as waveform, spectrum analyzer, or sonogram. You can also zoom in or out by using the mouse wheel or the plus and minus buttons. You can also drag the display to scroll left or right.
Compare the processed and unprocessed vocal signals by clicking on the bypass button. You should hear a more consistent, clear, and expressive vocal sound after applying Sonible smartComp.
Using smart:comp for drums
Drums are another essential element in any music production, and they require careful compression to make them sound punchy, tight, and powerful. Sonible smartComp can help you achieve well-balanced drum compression in just a few clicks. Here are some tips on how to use Sonible smartComp for drums:
Use the "smart" button to let Sonible smartComp analyze your drum track and set the optimal compression parameters for each frequency band. This will help you achieve a transparent and balanced compression that preserves the dynamics and transients of the drum performance.
Adjust the global compression parameters such as threshold, ratio, attack, release, and makeup gain to suit your taste and style. You can also choose from different compression styles such as transparent, punchy, or smooth. A transparent style will keep the drum sound natural and unprocessed, while a punchy style will add some energy and presence to the drum, and a smooth style will make the drum sound more warm and soft.
Adjust the frequency-selective processing settings for each band to fine-tune the compression results. You can adjust the crossover frequencies by dragging the vertical lines on the spectral compression display. You can also solo or mute each band by clicking on the speaker icons. You can also use the spectral tilt feature to adjust the overall tonal balance of the drum. A general rule of thumb is to apply more compression to the low and high bands, where most of the drum punch and brightness are located, and less compression to the low-mid and high-mid bands, where most of the drum body and warmth are located.
Use the sidechain filtering feature to apply a low-pass filter to the sidechain signal. This will prevent high-frequency sounds such as cymbals or hi-hats from triggering the compression too much. You can adjust the cutoff frequency by dragging the horizontal line on parameters for each frequency band. This will help you achieve a transparent and balanced compression that preserves the dynamics and nuances of the guitar performance.
Adjust the global compression parameters such as threshold, ratio, attack, release, and makeup gain to suit your taste and style. You can also choose from different compression styles such as transparent, punchy, or smooth. A transparent style will keep the guitar sound natural and unprocessed, while a punchy style will add some energy and presence to the guitar, and a smooth style will make the guitar sound more warm and soft.
Adjust the frequency-selective processing settings for each band to fine-tune the compression results. You can adjust the crossover frequencies by dragging the vertical lines on the spectral compression display. You can also solo or mute each band by clicking on the speaker icons. You can also use the spectral tilt feature to adjust the overall tonal balance of the guitar. A general rule of thumb is to apply more compression to the high-mid and high bands, where most of the guitar brightness and clarity are located, and less compression to the low and low-mid bands, where most of the guitar body and warmth are located.
Use the sidechain filtering feature to apply a high-pass filter to the sidechain signal. This will prevent low-frequency sounds such as hum or noise from triggering the compression too much. You can adjust the cutoff frequency by dragging the horizontal line on the spectral compression display. A good starting point is around 80 Hz.
Use the spectral compression display to monitor how the compression affects each frequency band in real-time. You can switch between different views such as waveform, spectrum analyzer, or sonogram. You can also zoom in or out by using the mouse wheel or the plus and minus buttons. You can also drag the display to scroll left or right.
Compare the processed and unprocessed guitar signals by clicking on the bypass button. You should hear a more smooth, consistent, and expressive guitar sound after applying Sonible smartComp.
Using smart:comp for synths
Synths are another popular element in any music production, and they require careful compression to make them sound full, rich, and dynamic. Sonible smartComp can help you achieve well-balanced synth compression in just a few clicks. Here are some tips on how to use Sonible smartComp for synths:
Use the "smart" button to let Sonible smartComp analyze your synth track and set the optimal compression parameters for each frequency band. This will help you achieve a transparent and balanced compression that preserves the dynamics and harmonics of the synth sound.
Adjust the global compression parameters such as threshold, ratio, attack, release, and makeup gain to suit your taste and style. You can also choose from different compression styles such as transparent, punchy, or smooth. A transparent style will keep the synth sound natural and unprocessed, while a punchy style will add some energy and presence to the synth, and a smooth style will make the synth sound more warm and soft.
Adjust the frequency-selective processing settings for each band to fine-tune the compression results. You can adjust the crossover frequencies by dragging the vertical lines on the spectral compression display. You can also solo or mute each band by clicking on the speaker icons. You can also use the spectral tilt feature to adjust the overall tonal balance of the synth. A general rule of thumb is to apply more compression to the low-mid and high-mid bands, where most of the synth body and brightness are located, and less compression to the low and high bands, where most of the synth sub-bass and air are located.
Use the sidechain filtering feature to apply a high-pass filter to the sidechain signal. This will prevent low-frequency sounds such as kick drums or basses from triggerin